To help you get up and running quickly, we have compiled the most important information about your device on this page. We wish you a lots of success with your new AI embedded computer!
FAQ
The product manual for your device is available for download on the Syslogic SharePoint
Password: wIgHwvPVhm1
Drivers for all supported cameras can be found on our SharePoint here.
Password: wIgHwvPVhm1
To power up your AI embedded computer you need to connect the power supply to the pins 2 (+Power) and 1 (GND) on the M12-K connector.
Syslogic can provide the following power cable:
Power Cable, M12-K 5 Pin female Push-Pull <--> stranded wire, 1.5m
Order code: CAB/M12K5FLIT-150A
The device is already flashed with NVIDIA‘s Jetpack, so you are ready to boot up and log in:
username: nvidia
password: nvidia
NVIDIAs Jetpack is slightly modified to accomodate our Hardware. If you would like to re-flash Jetpack, follow these instructions
Attention: Using the SDK manager and NVIDIAs standard image will result in a device that won‘t boot!
Download the Jetpack for your Syslogic AI Computer from the download section here.
Password: wIgHwvPVhm1
Should you have any questions regarding your new Syslogic AI embedded computer, take a look at our FAQ
If you can‘t find an answer we are happy to assist you personally:
